Home  Products  Jetting Nozzles & Hoses  Warthog Classic Range    WT-3/8-C
Warthog® WT-3/8-C™

Features

 • Up to 275 bar
 • Flows 20-45 l/min
 • Lines 76-152 mm
 • Classic Workhorse Model

US Pat. No. 5,964,414
Clean 76mm - 152mm Lines with Elbows

Our smaller Warthog® sewer models have all the powerful features of the larger tools, but can negotiate elbows and clean-outs commonly found in laterals from homes, buildings, restaurants and other light commercial facilities. The WT-3/8-C™ is designed specifically to handle 75mm - 150mm lines and clean-outs. This tool is most commonly used an small capacity pumps and cart jetters.
We’ve added permanent carbide buttons to the WT-3/8-C™ model, specifically designed to handle demanding applications. Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8™ models.
The WT-3/8-C™ features a 3/8 npt or BSPP inlet port.

Maintenance Manuals
Warthog® WT-3/8-C™ View PDF		 WT-3/8-C™ Specifications
Maximum Pressure 275 bar
Operating Pressure 100-275 bar
Rotation Speed 300-500
Flow 20-45 l/min
Flow Rating 0.75 Cv
Pulling Force 22-90 Nm
Inlet Port 1/4 NPT or BSPP
Tool Diameter 48 mm
Length 76 mm
Nozzle Ports 3 x 1/8 NPT
Weight Complete .54 kg
Safety First!
Powerful Tools Demand Respect
If the WARTHOG WV-1/4″ is being used in pipes larger than 4” in diameter, a rigid stinger should be installed between the tool inlet and the hose end. Otherwise the tool can turn around inside the line and come back toward the operator, causing serious injury or death.